EZ-45 battery wire cutter for dia 45mm Al/Cu cable armoured cable(EZ-45)

Feature:


1. The hydraulic nuit incorporates an automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached.

2. A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the piston&die when the trigger is released.

3. The unit is equipped with a double piston pump which is characterised by a rapid approach of the dies forwards the connector and a slow crimping motion.

4. The crimping head can be smoothly turned by 350° Around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.

5. Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of non operation the tool is always ready to operate. In addition we see a power weight ratio with 50% more
Capacity and shorter charging cycles compare to NiMH batteries.

6 A temperature sensor makes the tools stop working automatically when the temperature over 60º C under long time working, the fault signal sounds, it means the tool can't continue work until the temperature reduced to the normal.

Technical data: